What Are The Rust Removal Methods For The Rust Of The Stroke Bearing?

How to apply anti -rust oil:

1) Spray method: Some large rust -proof materials cannot be coated with soaking method. Generally, filtering compressed air with about 0.7MPa pressure is used to spray in air cleaning places. The spray method is suitable for solvents diluted rust -proof oil or thin -layer rust -proof oil, but it is necessary to use comprehensive fire prevention and labor protection measures.

2) Soaking method: Some small items are soaked in rust -proof oil to allow its surface to adhere to a layer of rust -proof oil. The thickness of the oil membrane can be achieved by controlling the temperature or viscosity of the anti -rust oil.

3) Brushing method: For outdoor building equipment or special shapes that are not suitable for soaking or spraying, you must pay attention not to accumulate when painting, but also to prevent leakage.

Rust -removing method of rust of stamping bearing:

1) After the surface is dry and clean, it can be dried with filtering drying air, or dried with a dryer of 120 ~ 170 ° C, and can also be dried with clean gauze.

2) Surface cleaning: The cleaning must be selected according to the nature of the surface of the rust -proof and the conditions at that time. Commonly used solvent cleaning methods, chemical treatment cleaning methods and mechanical cleaning methods.